Gas Detector, Safety & HART® Smart Transmitters
Brochures, Catalogs & More
United Electric Controls
A Message From The CEO
United Electric Controls has more than 80 years of proven experience providing rugged pressure and temperature electromechanical and electronic switches to Chemical & Petrochemical, Power, Water & Wastewater and Oil & Gas industries, as well as many other challenging OEM applications.
UE pressure switches, pressure transducers and pressure transmitters, temperature switches and temperature sensors are designed for rugged, industrial environments.
To learn about additional industry solutions please visit our Viewpoints/Whitepapers section.
United Electric Controls has more than 150 distributors worldwide. Please visit our distributor locator page to find a distributor near you.
Three Manufacturing Divisions
Lean manufacturing for maximum productivity
Operational excellence (OpX) reduces waste
One-piece-flow for optimum manufacturing efficiency
Technical Sales: 617.923.6977
United Electric Controls Company
180 Dexter Ave
Watertown, MA 02472-4200
We actively use feedback to improve our delivery and provide you with the best possible service.
54 Series Overview
Pressure and Temperature Switches
The 54 Series offers the OEM a combination of reliable performance and low cost. Available in pressure and temperature versions, with single or dual SPDT outputs and enclosed or open frame (skeleton) construction, the 54 Series family provides design versatility.
The 54 has been field-proven in a wide variety of OEM applications, including medical, laboratory, fire protection and heating equipment.
NEMA 1 or open frame construction
SPDT or dual switch outputs
Reference dial or hex adjustment
◦ 30" Hg Vac to 6000 psi
1 bar Vac to 414 bar
◦ -130 to 650ºF
-90 to 340ºC
Approvals: UL, CSA, CE
Choice of one or two switch outputs
Reference dial or hex screw-type setting
Optional 1/2” NPT (male) by 1/8” NPT (female)
polysulfone® pressure connection
Optional external manual reset
NEMA 1 or open frame (skeleton) versions for
Brass bellows models
Polysulfone® is a registered trademark of Amoco
Storage Temperature -65° to 160°F (-54 to 71°C)
Ambient Temperature Limits
Models 126-164, 610-614: -40 to 160°F (-40 to 71°C);
Models 22-28; 16008, 16009: 0 to 160°F (-18 to 71°C)
Temperature Models -40 to 160°F (-40 to 71°C). Set point typically shifts less than 1% of range for a 50°F
(28°C) ambient temperature change.
Shock Set point repeats after 15 G, 10 millisecond duration
Vibration Set point repeats after 2.5 G, 5-500 CPS
Enclosure Classification Types C54, C54A, B54, F54, E54, J54, J54A, H54: complies with NEMA 1 requirements.
Types C54S, B54S, F54S, E54S, J54S, J54AS, H54S: not applicable
Set point Repeatability
Models 22-28, 16008-16009, 126-164: ± 1% of full scale range;
Models 610-614: ± 1.5% of full scale range
Temperature Models ± 1% of full scale range
Switch output One or two SPDT snap action switch(es); dual switch may be separated up to 100% of
range; switches may be wired “normally open” or “normally closed”
Electrical rating 15A 125/250/480 VAC resistive except models 16008-16009 – 20A 480/VAC. Electrical
switches have limited DC capabilities. Consult UE for additional information.
Enclosure Material Lexan® black finish for Types J54, J54A, H54, B54, C54, C54A, E54, F54 only
Weight Approximately 12 oz.
Electrical Connection Types J54 & H54, C54, C54A, B54, E54, F54: 7/8” diameter hole; Type J54A: 1-1/16”
Pressure Connection Models 22-28, 16008, 16009: 1/4” NPT (male); 126-164, 610-614: 1/4” NPT (female)
Temperature Assembly Bulb and Capillary: 6 feet copper or 304 stainless steel capillary Immersion Stem: Brass
Fill Non-toxic oil
Temperature Deadband Typically 1% of range under laboratory conditions (70°F circulating bath at rate of 1/2°F
per minute change)
54 Series Customer Drawings
10890 - Type B54, Models 103 to 109
10948 - Type B54S, Models 103 to 109
10783 - Type C54, Models 103 to 109
12203 - Type C54A, Models 103 to 109
12204 - Type C54AS, Models 103 to 109
10755 - Type C54S, Models 103 to 109
10836 - Type E54, Models D20BC to D23BS
10915 - Type E54S, Models D20BC to D23BS
10778 - Type F54, Models D20BC to D23BS
10772 - Type F54S, Models D21BS to D23BS
10822 - Type H54, Model 22
10820 - Type H54, Models 24 to 28
10945 - Type H54S, Model 22
10946 - Type H54S, Model 24 to 28
10771 - Type J54, Model 22
10770 - Type J54, Models 24 to 28
10965 - Type J54, Models 137 to 164
10966 - Type J54S, Models 137 to 164
11144 - Type J54, Models 610 to 614
12168 - Type J54A, Model 22
12169 - Type J54AS, Models 137 to 164
12171 - Type J54A, Models 137 to 164
12167 - Type J54A, Models 24 to 28
12166 - Type J54AS, Model 22
12165 - Type J54AS, Models 24 to 28
10582 - Type J54S, Model 22
10575 - Type J54S, Models 24 to 28
11143 - Type J54S, Models 610 to 614
13955 - Type J54S-16008
13956 - Type J54-16009
Learn about our tradeshow events, latest news, product solutions and general information.
Follow our Tweets about the Gas Industry, Water/Wastewater, Chemical Plants and more.
See what other industry leaders are talking about. View our products and solutions. Share your concerns and solutions with us.
Watch our how-to videos on YouTube. Learn about the new ONE Series Safety Transmtter, How to Build a Sensor with the Sensor Box™ Toolkit, or The Role of a Sensor, Logic Solver and Final Element in a SIS.
A picture is worth a thousand words. Visit us on Pinterest and see high resolution product images and industry solutions.
Our Blogs are full of Technical Information and Resources. Read our latest blog post on "Mechanical Switch Upgrades Made Easy".
180 Dexter Avenue, Watertown, MA 02472-4200
© 2017 United Electric Controls. All rights reserved.